Sears Home Services
Sears Home Advantage
appointment lookup logoAppointment Lookup
telephone logo646-440-2692
RepairHome WarrantyTune-Up & MaintainFencingShop Parts
Resources
RepairHome WarrantyTune-Up & MaintainFencingShop PartsResource CenterGlossaryHelp
sears home advantageSears Home Advantageappointment lookup logoAppointment Lookup
  1. Repair
  2. Maytag
  3. Maytag Washer
  4. Washer leaking from bottom

Maytag washer leaking from bottom

Common reasons your Maytag washer is leaking from bottom

The most common reasons your Maytag washer is leaking from bottom are a clogged water valve assembly, broken motor or a cracked drain hose.

  • 62%

    62% of the time it's the
    Water Valve Assembly

  • 10%

    10% of the time it's the
    Motor

  • 10%

    10% of the time it's the
    Drain Hose

  • 18%

    18% of the time it's the
    Something else

  • Use The Repair or Replace Calculator

    Determine What's Best For Your Appliance

    Product Type
    Home Appliance Brand
    How Old Is Your Appliance?

    Most common repairs needed to fix a Maytag washer

    Water Valve Assembly Replacement

    The water valve assembly controls water flow into the washer. A clogged water valve inlet screen will prevent the wash tub from filling with hot water, cold water or both. Electrical failures in the valve may also prevent the valve from opening to allow water into the tub. The valve connects your home’s water supply to the washer. A faulty valve may begin leaking into the tub or around the connections to the water supply hoses. If you suspect a faulty water valve assembly, have a Sears Home Services professional inspect the washer and replace the valve if needed.


    Motor Replacement

    A broken washer motor will prevent the spin basket from rotating or agitating, and can also cause a variety of other issues that affect the washer’s ability to function properly. Signs that the motor is wearing out include unusual noises during operation, such as grinding or squealing sounds. The washer may also exhibit erratic spinning or agitation, with clothes not being properly rinsed or still soaking wet after the spin cycle. Additionally, a worn-out motor may lead to the washer not completing its cycles, stopping abruptly, or not starting at all. Burnt smells or overheating around the motor area can be indicative of internal problems. In some cases, visible damage to the motor itself may be apparent.

    Drain Hose Replacement

    A cracked washer drain hose produces leaks, and if the crack is small it can often go undetected until water is seen pooling around the bottom of the washer. Additionally, a cracked hose may also collapse, preventing water from efficiently draining from the tub. Water may accumulate inside the drum, resulting in prolonged washing cycles. If you suspect your washer drain hose is cracked, have it replaced by a Sears Home Services professional

    What to expect when you experience a Maytag washer leaking from bottom issue

    How is the leaking from bottom problem fixed?

    Correcting most leaking from bottom problems usually involves replacing the water valve assembly, motor or drain hose. However, there are many potential causes, so a thorough diagnosis is key to fixing the problem. An accurate diagnosis is essential to understanding how much the repair will be.

    Sears Home Services recommendations for a washer that is leaking from bottom

    When the washer is leaking from bottom it can be for many reasons. To avoid replacing unneeded parts we recommend having a Sears Home Services professional perform diagnostic tests to identify the root cause of the problem. Our technicians are experienced at diagnosing all types of washer failures.

    What to look out for with a washer leaking from bottom diagnosis

    Diagnosing modern appliances without proper knowledge and training can be difficult. Without using proper diagnostic techniques, fixing your washer problem will only be achieved through changing parts on a hunch. Appliances, especially in the last 10 years, have become extremely advanced, and many models have electronic parts that are difficult to test. DIY repairs on the latest appliance models are becoming increasingly difficult.

    Maytag Bravos XL Leaking From the Bottom

    When your Maytag Bravos XL is leaking from the bottom, follow these troubleshooting steps to find and fix the leak.

    1. Unplug the washer and shut off the water supply faucets behind the washer.
    2. Check for leaks from the fill hoses that will drip down and appear to be coming from the bottom of your Bravos XL washer. Tighten fill hose connections if they’re loose and dripping. Replace the fill hoses if they’re leaking.
    3. See if the house drain for the washer is clear. A clogged house drain for the washer can leak water that will appear at the bottom of the washer. Clear the washer drain using a plumber’s snake or have a plumber clear that drain.
    4. Check the drain hose for a leak and replace the drain hose if it’s leaking. Have a service technician replace the drain hose if you’re unable to complete that repair yourself.

    If these basic troubleshooting tips don’t help you resolve the problem with your Maytag Bravos XL leaking from the bottom, schedule washer repair service and we’ll send a Sears Home Services technician to your home to fix the machine.

    Common Causes for a Maytag Washer Leaking Water

    Being aware of the common causes associated with a Maytag washer leaking water will often help you fix the problem. Here are the most common causes for a Maytag washer leaking water:

    • Leaking fill hoses. Loose fill hose connections to the water supply faucets or the fill valves on the back of the washer can cause water leaks. Tighten loose connections or replace damaged or worn fill hoses when you find them leaking.
    • Clogged washer drain. When water won’t flow through the house drain for the washer, the drain water will spin onto the floor. Clear the drain using a plumber’s snake or have a plumber clear a clogged house washer drain.
    • Cracked drain hose. A cracked or damaged drain hose will leak water on the floor behind the washer. Replace the drain hose if it’s damaged and leaking. Have a service technician replace the hose if you’re unable to complete that repair yourself.
    • Detergent dispenser leak. Clogged stand pipes in the dispenser drawer can cause water to spill out of the drawer and leak. Clean the dispenser regularly to prevent leak.

    If you’re unable to find a fix the cause when your Maytag washer is leaking water, schedule washer repair service to have a Sears Home Services technician resolve the problem.

    What to do When Your Maytag Washer is Leaking Water From the Bottom

    First, unplug the washer to prevent electrocution and shut off the water supply to prevent continued leaking if a water valve is leaking water into the tub.

    Next, follow these steps to find and fix the source of the leak when your Maytag washer is leaking water from the bottom.

    1. Examine the washer fill hoses. Tighten fill hose connections if you find them loose and dripping. Check the hose washers and replace any washer that is worn or damaged. Replace the fill hoses if they’re old, cracked or worn.
    2. Check the house washer drain for a clog. Clear the clog using a plumber’s snake or have a plumber clear that drain.
    3. Examine the drain hose and replace that part if you find it leaking. Have a service technician replace the drain hose if you’re unable to complete that repair yourself.
    4. Check the water level in the tub. If the tub fills with water when the washer is off or is overfilling and leaking out of the tub during the cycle, you may need to replace the inlet water valve assembly.

    If these basic troubleshooting steps don’t help you resolve the problem when your Maytag washer is leaking water from the bottom, schedule washer repair service and we’ll send a Sears Home Services technician to your home to fix the leak.

    Maytag Bravos XL Washer Leaking

    When your Maytag Bravos XL washer is leaking, unplug the washer and shut off the water supply faucets behind the washer.

    Follow these troubleshooting steps to find and fix the source of the leak.

    • Check the fill hoses. If water drips from the fill hose connections on the water supply faucets or the back of the washer, tighten the fill hose connections. If water still drips, check the washers inside the hose connections and replace any worn or damaged washers. Replace the fill hoses if they’re cracked or damaged and leaking from the hose itself.
    • Look for a leak from a clogged house drain for the washer. If you find the house drain clogged, clear the drain using a plumber’s snake or have a plumber clear the clog.
    • Examine the washer drain hose. Replace the drain hose if it’s cracked or damaged and leaking. Have a service technician replace the drain hose if you’re unable to complete that repair yourself.
    • Check the tub to see if it’s overfilled and leaking. A water valve that is stuck open could be causing the tub to overfill and leak. Leave the water supply faucets off and schedule service to have a service technician replace a leaking water valve. Drain water out of the washer using a wet/dry shop vacuum if you need to wait for repair service for more than one day.

    These tips may help you find and resolve the problem with your Maytag Bravos XL washer leaking. Schedule washer repair service if you’re unable to find and fix the cause of the water leak yourself.

    What our customers say about us

    With more than 1.3 Million 5 Star Reviews, you don't have to take our word for it

    Thanks

    Thanks for your expert analysis of the problem that caused the flooding of my home .I was scared the first few times I used the machine , but all is working great.


    Frank U, Coconut Creek, FL

    Excellent service.

    Pleasant person to work with. He explains things to you.


    Jacklyn J, Bessemer, AL

    Very Professional

    Very professional, thoughtful and knowledgeable I would highly recommend him.


    Marilyn W, Covington, LA

    Repair Washer Resources

    Title image for blog article "How Does a Pressure Transducer Work?"
    5 min readDec. 05

    Learn how a pressure transducer works to detect water level in a washing machine.

    Title image for blog article "How Does a Top Load Washing Machine Work?"
    10 min readDec. 04

    Learn how a top-load washing machine works and how to use and maintain the washer.

    Title image for blog article "How Does a Mixing Valve Work?"
    6 min readNov. 26

    Learn how a mixing valve works to control water temperature in a washer.

    What's the Reason Behind My Washer Drum Being Loose and Banging Around image
    6 min readNov. 18

    Learn why your washer drum is loose and banging around and get professional advice on fixing it. Contact Sears Home Services for a reliable repair service.

    Glossary Terms

    Hard water is water that contains high levels of dissolved minerals, particularly calcium and magnesium. It contrasts with soft water, which has lower concentrations of these minerals.

    A washing machine pedestal is a platform that raises the washer off the ground, providing easier access to the appliances and often includes additional storage space such as drawers.

    A washer tub is the interior part of a washing machine where clothes are placed for washing, typically made of stainless steel, plastic, or porcelain-coated metal, designed to hold water and withstand the agitation or spinning during the wash cycle.

    Fabric softener is a laundry additive used to soften and freshen clothing, reduce static cling, and make fabrics feel smoother.

    Additional possible Maytag washer symptoms you may experience

    • Maytag washer won't stop spinning
    • Maytag washer won't start cycle
    • Maytag washer won't drain
    • Maytag washer not working
    • Maytag washer not turning on
    • Maytag washer not starting
    • Maytag washer not spinning
    • Maytag washer not filling
    • Maytag washer not agitating
    • Maytag washer noisy
    • Maytag washer no power