Haier

Haier refrigerator compressor not running

Haier’s reputation for excellence is well-established, but even the finest appliances break and need repair. Fortunately for Haier appliance-lovers, Sears Home Services repairs thousands of brand name repairs every month.


which {{brand}} appliance is broken?

{{brand}} repair is quick and easy


Haier kitchen and laundry appliances modernize life by bringing convenience and fun to the kitchen and laundry room. Haier products are extremely reliable and rarely break down, but parts may eventually wear out. Should your Haier appliance malfunction, trust Sears Home Services to have the expertise and parts you need to get your Haier appliance back into top shape.

We’ll share what we've learned over the years fixing everything from their fridges to their washers and specialty items. 

## Haier Refrigerators 

Haier fridges are generally reliable, but they do develop some common issues over time that I see repeatedly in service calls. 

* Not cooling right? First check if it's getting proper airflow. These units need a few inches of space around them for ventilation. Pushed too close to the wall is a common mistake I see in many homes. The condenser can't release heat properly when it's cramped against a wall. 

* Making strange noises? Different sounds mean different problems. Clicking often means the start relay is acting up. Buzzing might be the compressor struggling. Rattling is usually something loose like a water line tapping against the back. Sometimes it's just a poorly leveled unit wobbling on uneven floors. 

* Ice building up in the freezer happens when the defrost system isn't working properly. Could be a bad defrost timer, heater, or thermostat. You'll need to manually defrost it first before fixing anything. Unplug it, remove all food, and let all the ice melt completely. Sometimes I put towels around the bottom to catch the water. 

* Water under the fridge often means a clogged drain tube. They get blocked with food particles and ice over time. Warm water and a pipe cleaner usually fixes it. I've pulled some pretty gross stuff out of these drains over the years - everything from mold to forgotten vegetables. 

* Fridge section warm but freezer cold? The damper control might be stuck. It regulates cold air flowing from freezer to fridge compartment. Sometimes it's just frozen in position, other times the control motor has failed. The damper is usually located in the back of the fresh food section where cold air comes in. 

* Compressor runs constantly? Check door seals first. Close the door on a paper bill - if it pulls out easily, the seal isn't tight anymore. Also clean those condenser coils underneath or on the back. I've seen coils so caked with dust and pet hair that the fridge had to work twice as hard to cool properly. 

* Ice maker problems are common in some models. Check the water supply line first. Make sure it's not kinked or frozen. The water inlet valve might be clogged or failed too. Sometimes the ice maker arm gets stuck in the "off" position accidentally. These are surprisingly simple machines that just need basic maintenance. 

## Haier Washers 

Haier washing machines have their own common issues but are generally fixable without major expense. 

* Won't drain or spin? Check for a clogged drain filter first. It's usually behind a small panel on the lower front of the machine. Also make sure the drain hose isn't kinked or clogged. I once found a sock that had somehow worked its way into the drain hose of a customer's machine. The pump was fine, just couldn't push water past the blockage. 

* Leaking water? Could be a worn door gasket, loose hose connection, or cracked tub. Check underneath to see exactly where water is coming from. Front loaders typically leak from door gaskets, while top loaders often leak from fill hoses or tub seals. Water damage to floors gets expensive fast, so don't ignore even small leaks. 

* Loud banging during the spin cycle usually means an unbalanced load or worn suspension springs. Try redistributing the clothes first before assuming parts need replacement. Some Haier models are particularly sensitive to unbalanced loads. Heavy items like jeans or towels should be spread around the tub, not bunched on one side. 

* Control panel not responding? Try resetting it by unplugging for about two minutes. Many electronic glitches clear up this way. It's amazing how often this simple step fixes seemingly complex problems. Modern washing machines are essentially computers attached to motors and water valves. 

* Door won't open on front loaders? These have safety locks that sometimes stick. If the cycle is definitely complete, try unplugging for a few minutes to reset the lock mechanism. There's sometimes an emergency release cord inside the bottom panel if you really need to get clothes out. 

* Bad odors coming from the washer probably mean mold and mildew buildup. Run a hot cycle with vinegar or washer cleaner. Leave the door open between uses to let it dry out. Front loaders are especially prone to this problem because water pools in the gasket folds. Make a habit of wiping the gasket dry after the last load of the day. 

* Error codes need to be matched to your specific model. Write down the exact code and check your manual or give us a call. Most Haier washers use a system where the error code tells you exactly which component is reporting a problem. This makes diagnosis much more straightforward once you know the code meanings. 

## Haier Dryers 

Dryer issues tend to be pretty consistent across brands, and Haier models follow predictable patterns. 

* Not heating is the biggest complaint I hear. First check for a blown thermal fuse - it's a safety device that breaks when the dryer overheats. Usually happens because of clogged vents. The fuse is cheap and easy to replace, but you need to address why it blew in the first place or the new one will just blow too. 

* Takes forever to dry clothes? Clean out the entire vent system from the dryer to the outside of your house. Lint builds up over the years and blocks airflow. I've pulled buckets of lint from vent systems in older homes. This buildup is also a serious fire hazard, so cleaning vents thoroughly helps prevent house fires. 

* Making squealing or thumping noises? Drum rollers or bearings are probably worn out. Belt issues also cause strange noises. The belt stretches over time and eventually develops cracks and wear spots. Squeaking often means drum rollers need lubrication or replacement. Thumping usually indicates a worn belt or something caught in the drum. 

* Dryer starts but stops after a few minutes? Could be overheating due to poor ventilation. The thermostat is shutting it down for safety. This cycling on and off puts a lot of strain on components and wastes energy too. Always check for proper airflow before replacing parts. 

* No power at all? Check the obvious - breakers, plugs, power cords. Then look at door switches which prevent operation when the door isn't fully closed. The switch is a small plastic piece that gets pressed when the door shuts. They break or get misaligned after years of use. 

* Burning smells are never normal. Unplug immediately and check for obvious problems like a slipping belt or trapped items. I've found everything from coins to crayon stubs melted inside dryers. Sometimes small items slip through the drum holes into the cabinet below, where they can contact heating elements. 

## Haier Air Conditioners and Dehumidifiers 

These are Haier specialties and generally work well, but problems do crop up after a few seasons of use. 

* Not cooling properly? Clean the filter first - it's amazing how many service calls are fixed just by cleaning a clogged filter. Also check that nothing is blocking airflow to the unit. Furniture, curtains, or even outdoor plants can restrict air movement enough to affect performance dramatically. 

* Water leaking inside from window units usually means it's not tilted slightly downward toward the outside. They need that tilt for proper drainage. I usually aim for about half a bubble on a standard level - just enough slope for water to run out naturally without being obvious to the eye. 

* Turning on and off repeatedly often means it's either too big for the space (short cycling) or the thermostat sensor is located poorly. An oversized unit cools too quickly without removing humidity, making the room feel clammy. The sensor might be touching a cold surface or getting hit directly by the cold air discharge. 

* Making unusual noises? Could be loose parts, failing fan motors, or something caught in the fan blades. Rattling usually means something's come loose inside. Grinding typically indicates a problem with the fan motor bearings. High-pitched whining often means the compressor is struggling to start. 

* Remote control not working? Try new batteries first. Then check if the receiver on the unit is dirty or damaged. Sometimes the sensor gets blocked by dust or the internal connection works loose from wall vibration. Direct sunlight can interfere with some infrared remote signals too. 

* Dehumidifiers not collecting water might have a humidity sensor problem or the coils might be frozen. Make sure room temperature is above 65°F for proper operation. The coils need to be warmer than freezing for moisture to condense as water rather than ice. Some models shut down automatically when coils get too cold. 

## Haier Compact Appliances 

Haier makes lots of compact appliances for smaller spaces like apartments, dorms, and RVs. These have their own common issues I've encountered repeatedly. 

* Small fridges cooling poorly often have condenser coil problems. These coils get dusty and can't release heat properly. Clean them and make sure the unit has proper ventilation space. The compact size means less cooling surface area, so any blockage has a bigger impact than on full-sized models. 

* Compact washers with drainage issues sometimes have trouble because of improper installation. They need a good drain connection and proper water pressure. The pumps in these units aren't as powerful as standard washers, so any restriction in the drain line causes problems. Make sure drain hoses don't have sharp bends or uphill sections. 

* Countertop microwaves with heating problems might have a blown fuse or magnetron issues. Sparking inside is never normal and needs immediate attention. The waveguide cover (usually a mica sheet inside) might be damaged or food-splattered. This seemingly minor part actually protects the magnetron from damage. 

* Wine coolers not maintaining temperature often have thermostat problems or door seal issues. Make sure they're not in direct sunlight or next to heat sources like ovens or dishwashers. The temperature differential between inside and outside shouldn't be more than about 30 degrees for these units to work properly. 

* Portable dishwashers leaking typically have connection problems where they hook up to the sink. Check those fittings and make sure they're tight. The rubber washers in the quick-connect fittings deteriorate over time and need replacement. Also check internal hoses and pump seals if the leak seems to be coming from inside the unit. 

## Maintenance Tips for Longer Life 

Keep your Haier appliances running longer with some basic care that prevents costly breakdowns. 

* Clean refrigerator condenser coils twice yearly. Just unplug, pull it out, and vacuum beneath or behind. This simple task can extend compressor life significantly and reduce energy consumption by up to 30% in some cases. Schedule professional [appliance maintenance](/maintain/appliance-maintenance) to have a Sears Home Services technician clean the condenser coils and maintain the entire fridge for you.

* Washing machine dispensers get gunked up with detergent residue. Remove and clean them monthly with warm water to prevent buildup. Fabric softener especially tends to leave a waxy residue that eventually blocks proper flow. 

* Front-load washer door gaskets need wiping down after use to prevent mold. Leave the door open between uses too. That black gunk that develops in the folds isn't just unsightly - it causes odors and eventually damages the rubber gasket material. 

* Check and clean air conditioner filters monthly during heavy use seasons. Makes a huge difference in efficiency and prevents coil freeze up. Some models have washable filters you can rinse under the tap, while others need replacement filters. 

* Dryer vents need cleaning from end to end yearly. This prevents fires and improves performance dramatically. The entire path from dryer to outside needs inspection, not just the lint trap or visible portions of the vent. Schedule [Sears Dryer Vent Cleaning](/maintain/dryer-vent-cleaning) service yearly to have your dryer ducts thoroughly cleared.

* Wipe up spills in microwaves right away to prevent baked-on messes that can cause burning smells later. Food particles absorb microwave energy and can actually damage the interior over time if left to burn repeatedly. 

## Finding Replacement Parts 

When you need parts, Sears Parts Direct carries genuine Haier components. Use your model number when ordering to ensure proper fit. 

Common replacement parts include door seals, belts, switches, and filters. These wear out first on most appliances regardless of brand or model. 

Keep your old parts until the repair works right. Sometimes comparing old and new parts helps with installation or shows manufacturing changes you need to accommodate. 

Haier has been updating older designs, so replacement parts might look slightly different but still work fine. The function remains the same even if appearance varies slightly. 

## When to Call for Professional Help 

Some repairs are better left to [appliance repair](/repair) professionals with specialized training and equipment: 

* Refrigerator sealed system problems need special equipment and certification. If you suspect refrigerant leaks, call us. Handling refrigerant requires EPA certification and isn't legal for non-certified individuals to attempt. 

* Complex electronic control issues often need professional diagnosis tools. Modern appliances have sophisticated control boards that require specific testing equipment to troubleshoot properly. 

* Any repair you're not comfortable tackling yourself is best left to [appliance repair pros](/repair). These machines can be dangerous if mishandled, with risks ranging from electrical shock to gas leaks depending on the appliance. 

* Standing water where it shouldn't be might indicate serious problems that need expert attention. Water damage can affect hidden components and create safety hazards with electrical systems. 

We've been fixing Haier appliances for years. Our technicians are factory-trained and carry many common parts on their trucks for faster repairs. Contact us now if you need Haier appliance repair.


Haier Appliance Repair Guide 

Schedule NOW 802-613-1926 for same/next day repair service on your Haier appliance. No matter where you bought it - we can fix it now!

Need Haier appliance repair services? Our expert service technicians are ready to help. Schedule a repair appointment online today.

Haier Appliance Repair

Haier Appliance SERVICE repair near me - 802-613-1926

Elbert has always does his job thorough, I can always count on him.  He has been our service person for many years and
It's always great to see him ,  he takes very good care of his customers .

Air conditioning

Adam J., was knowledgeable about his craft and has a pleasant work ethic. Sears is lucky to have him. Would be nice if he had a Sears van or truck when coming to personal homes now days.

Soft start on units

Very nice, professional and knowledgeable.  Would recommend him highly

Owner

Mr. Fred was professional and polite. Thanks for the quick service.

Knowledgeable, Quick and Professional

Was helpful and patient. Got unit working and nest app working again

Good technicians

Excellent service! Very knowledgeable and he explained everything to us. Very happy with his politeness and we will switch to Sears to take care of our appliances because of this young man. Thank you.

Excellent

Albert was a nice guy showed me how dirty the a/c unit was, he also explained that the bushes needed to be trimmed near the unit. He also explained that I should rinse off the unit once a month to help unit running efficiently. 👍🏻

Tune up A/C  unit.

Sean was very plesant and very professional.
He provided excellent service.

Very nice and professional

Great service, very friendly and easy to work with in this experience

Great service

My technician Corey was a very well mannered person. Check and found problem and fixed it in a timely maner.

Haier Repair Reviews

A/C REPAIR