Sears Home Services
Sears Home Advantage
appointment lookup logoAppointment Lookup
Repair
Home Warranty
Tune-Up & Maintain
MembershipShop Parts
Resources
Repair
Home Warranty
Tune-Up & Maintain
MembershipShop Parts
Resource Center
Glossary
Help
sears home advantageSears Home Advantage
appointment lookup logoAppointment Lookup

Table of Contents

High Freezer or Ice Room Temperature

Water Supply Problems

Ice Maker Operational Issues

When to Call a Technician to Fix the Icemaker

Frequently Asked Questions

  1. Resource Center
  2. Repair

Why Is My Ice Maker So Slow, and Can I Fix It Myself?

11 min readUpdated Feb. 04, 2025Lyle WeischwillRefrigerator
Title image for blog article "Why Is My Ice Maker So Slow, and Can I Fix It Myself?"

A slow or intermittent ice maker can be frustrating, especially when you rely on a steady supply of ice for drinks, parties, or everyday use.

The good news? Many of the common causes behind sluggish ice production are issues you can troubleshoot and fix on your own.

Let’s dive into the most likely culprits and how to get your ice maker back to full speed.

KEY TAKEAWAYS

  • Ensure your freezer is set to 0°F for optimal ice production. Inspect and clean door seals, clear air vents, and check for any blockages in the ice dispenser chute that might disrupt cooling efficiency.
  • Replace the refrigerator water filter every 6 months, check for kinks or clogs in the water supply line, and verify that the water pressure is sufficient. Defrost the fill tube if it’s frozen and address any issues with the water inlet valve to maintain proper water flow to the ice maker.
  • Clear any ice cubes stuck in the ejector arms, reset the ice maker control board if necessary, and inspect for damaged components. If issues persist or are beyond your ability to repair, schedule refrigerator repair service to fix the problem.

freezer-temperature-setting-image

High Freezer or Ice Room Temperature

Your ice maker’s performance depends heavily on your freezer’s temperature when the ice maker is located inside the freezer compartment.

Freezer compartment temperature can also affect ice production in the ice room of a French door refrigerator if the freezer compartment is the provider of cooling for the ice room. When the ice room is located on the left door of the French door refrigerator, you’ll see a vent openings that supply that cold air when you open the left-side door. The image below shows the air flow through the ice room.

airflow-through-the-indoor-ice-room-from-the-freezer

The ice room in some French door refrigerators has its own evaporator cooling system instead of depending on the freezer compartment for cooling. Ice room cooling problems can cause low ice production.

When you see the ice room positioned in the top left corner of the refrigerator compartment as shown in the image below, the ice room typically has its own evaporator and cooling system.

ice-room-in-a-french-door-refrigerator

If the freezer or ice room isn’t cold enough, the water in the ice maker won't freeze quickly, slowing down production. Ideally, your freezer should be set to 0°F.

Ice room temperature must be at 0-degrees as well to produce ice efficiently.

Check the Freezer Temperature Setting

When the ice maker resides in the freezer compartment or the ice room in the door of a French door refrigerator is supplied with cooling air from the freezer compartment, check the freezer temperature setting.

Adjust the freezer temperature if it isn’t set at 0-degrees.

Inspect the Door Seals

A faulty or dirty door gasket can let warm air in, raising the freezer’s temperature. Clean the gasket with warm, soapy water and replace it if it’s torn or loose.

Here’s a video that shows how to replace the refrigerator and freezer door gaskets in a common French door refrigerator:

Inspect the indoor ice room door gasket and replace that part if it’s torn or damaged.

The image below shows that part on a parts diagram for a common French door refrigerator.

ice-room-door-gasket-image

Clear the Air Vents

Blocked air vents can limit cold air circulation through the refrigerator and freezer compartments.

Rearrange items in the freezer and refrigerator to ensure the vents remain unobstructed.

You can often find a diagram of air flow through the refrigerator and freezer compartments in the owner’s manual. An example of some air flow diagrams for common refrigerators are shown in the image below.

refrigerator-airflow-diagrams

Check the Ice Dispenser Chute

An ice cube or ice chips stuck in the ice chute can blog the ice dispenser door from closing. Warm air can enter the freezer or ice room through the partially open ice dispenser door to cause cooling problems in the freezer or ice room.

Check the ice chute for buildup of ice chips or an ice cube that’s propping the ice dispenser door open.

ice-cube-stuck-in-ice-dispenser-chute-door

Clear the ice chute and that blockage if you find the ice dispenser door blocked.

Check the Actual Temperature in the Freezer and Ice Room

If you suspect warm temperatures in your freezer or ice room, use an accurate thermometer to check the temperature.

If the actual temperature in the freezer or refrigerator is too high and you’re unable to determine the cause of the problem by following the troubleshooting tips described above, schedule refrigerator repair service to have a Sears Home Services technician fix the cooling and ice maker problems.

Water Supply Problems

A proper water supply is essential for ice production. If water isn’t reaching your ice maker efficiently, it can lead to slow ice-making or no ice at all.

Common Icemaker Water Supply Issues

Check for these problems when you encounter intermittent ice production or you see smaller than normal ice cubes.

Replace the Refrigerator Water Filter

If your fridge uses a water filter, be sure that you replace that filter every 6 months or when the reminder light turns on at the control panel.

A clogged water filter can cause poor ice production.

Clogged or Kinked Water Line

A kink in the water supply line can restrict water flow. You’ll need to get a helper and carefully pull the refrigerator out to check the water supply line behind the fridge.

Straighten the water line and push the refrigerator back in if you found the supply line kinked. Replace the water supply line if it’s damaged or won’t allow water to flow properly after being kinked.

If you didn’t find a kink in the water supply line, a clog in the water supply cut-off valve could prevent proper water flow to the fridge and icemaker.

Sometimes you can clear a clog that is caused by mineral deposit from the water supply cut-off valve by simply cycling that valve shut and back open.

If that tactic doesn’t improve water flow or you suspect a problem with water pressure or flow through the water supply line going to your fridge, check the water pressure and flow by following these steps:

  1. Shut off the water supply cut-off valve.
  2. Disconnect the water supply line from the back of the refrigerator.
  3. Place the end of the water supply line in a bucket and briefly open the water supply valve to check the volume and pressure of water coming from the end of the water supply line.

If water pressure or volume is low, have a plumber fix the water supply going to your refrigerator.

Frozen Ice Maker Fill Tube

The water fill tube for the ice maker can get frozen and water won’t fill the ice mold when this component is blocked by an ice plug.

Check the fill tube and defrost it with a hair dryer on a low heat setting if you find it frozen.

Water Inlet Valve Failure

A failed or clogged water inlet valve can prevent the ice maker from getting water or getting the right amount of water.

A water valve that’s stuck partially open can also cause water to trickle constantly through the fill tube. That trickling water can freeze up and clog the fill tube, causing ice production problems.

A service technician will typically need to diagnose and repair problems with a water inlet valve on your fridge. Schedule refrigerator repair service if you suspect that the water inlet valve isn’t working properly.

If you’re certain that the water inlet fill valve isn’t working and you want to replace it yourself, unplug the refrigerator and follow the steps in this DIY video to replace the water inlet valve yourself:

Ice Maker Operational Issues

An ice cube stuck in the ejector arms can prevent the ice maker from working. Check this issue and clear the stuck cube using a wooden cooking spoon if necessary.

Some icemakers are controlled by electronic control boards. Resetting the control board can sometimes fix ice production problems.

To reset the control board on some ice makers, you can press and hold the Test button to cycle the unit. If you’re ice maker doesn’t have a test button, you may need to press and hold the Ice Cube Size Selector switch for 5 seconds to cycle the ice maker and reset the control board.

Another way to reset the control board for the ice maker (and all the control boards in the fridge) is to unplug the power cord or shut off the house circuit breaker for the refrigerator for 5 minutes to completely disconnect electrical power. Restore power and the control boards will reset. This may restore normal ice production in your fridge.

Sometimes, the ice production problem lies within the ice maker itself. Components like the thermostat, motor, or ejector arm can malfunction, causing delays in the ice-making cycle. When the ice maker isn’t working and you see physical damage to components, you’ll likely need to replace the ice maker or have a technician replace it.

When to Call a Technician to Fix the Icemaker

In many cases, you can fix a slow or malfunctioning ice maker with basic troubleshooting steps or expert tips like the ones described above.

Use your refrigerator’s manual for guidance and consult safe and proven online repair videos for more complex tasks.

If the problem persists, it’s likely time to call in a professional.

Remember, regular maintenance can help prevent future icemaker issues. Replace your water filter on schedule, clean your freezer periodically, and schedule annual professional refrigerator maintenance to keep your entire fridge in top shape and operating efficiently.

With proper care, you can keep the ice flowing smoothly for years to come.

Frequently Asked Questions

How do I get my ice maker to work again?

Check the level sensing arm to make sure it’s in the “down” position. Check the fill tube and defrost it if you find it frozen. Some ice makers have a test switch or an ice cube size selector switch that you can hold to test cycle the ice maker. Cycling the ice maker manually may reset the control so the ice maker works again normally. If the ice mold is dry, check the water supply going to your fridge or replace the water inlet valve if it’s defective.

Why would my ice maker suddenly stop making ice?

Many different issues can suddenly prevent your ice maker from working. Problems with the ice bin level detection system will cause the ice maker to detect that the ice bin is full when it is not. Ice maker control, electrical and mechanical problems can prevent the module from working. High freezer or ice room temperature can prevent the ice maker module from detecting that the ice in ice mold is frozen. A frozen fill tube on the ice maker can prevent the water supply system from filling the ice mold with water. Take a systematic approach to check these issues and find the cause of the sudden icemaker failure.

Is it worth fixing an ice maker?

Fixing individual parts of a refrigerator ice maker is often impractical because the parts are often difficult to replace on your own. Some replacement parts aren’t even available separate from an entire new ice maker assembly. Perform proper diagnosis and troubleshooting before deciding whether to replace an ice maker. If you find a specific part that is inexpensive and easy to install, it’s definitely worth it to fix an ice maker rather than replacing it. When the part is nearly expensive as a complete replacement ice maker assembly, then replacing the ice maker certainly makes more sense.

How do I reset an ice maker?

There are several effective ways to reset an ice maker. If the ice maker has a level detection arm, lift that arm all the way up and then lower it to the fully “down” position. If your ice maker has a Test button or Ice Cube Size selector button, press and hold that button to manually cycle the ice maker and that will reset the module. The most universal way to reset an ice maker is to unplug the refrigerator power cord (or shut off the house circuit breaker for the fridge) to completely disconnect electrical power. Leave power off for 5 minutes to clear memory from all circuit boards inside the fridge. Restore power and all control board – including the ones that control the ice maker – will reboot and reset. The ice maker may then begin to work normally again.

Was this information helpful?

Repair Refrigerator Resources

Common Refrigerator and Freezer Problems
7 min readFeb. 03

In every household, the refrigerator stands as a silent sentinel, tirelessly preserving food day in and day out.

Read about 10 cool innovations of the refrigerators of today.
8 min readJan. 29

Discover the latest innovations in refrigeration technology that are transforming the way we store food.

Samsung Refrigerator Repair Advice
7 min readJan. 29

Samsung refrigerators are renowned for their reliability, but even the most dependable appliances can encounter issues over time.

Image of homeowner discovering that her fridge won't cool.
6 min readJan. 29

Get expert tips on troubleshooting a refrigerator that won't cool. Fix your cooling problems with help from Sears Home Services.

Glossary Terms

A dual ice maker is a feature in some refrigerators that includes two separate ice makers: one in the fridge compartment and another in the freezer section. This setup doubles the appliance's ice-making capacity.

A French-door refrigerator features two doors that open side-by-side on the top section for the refrigerator compartment, with a bottom freezer drawer, combining style, efficiency, and easy access to both refrigerated and frozen goods.

Refrigerant is a chemical compound used in HVAC systems and refrigerators to absorb heat from the environment by cycling through states of evaporation and condensation, enabling the cooling process through its cycle of evaporation and condensation.

R-12 refrigerant, also known as Freon-12, is a chlorofluorocarbon (CFC) compound that was once widely used in air conditioning systems, refrigerators, and aerosol propellants before its phase-out due to environmental concerns.

Common Repair Refrigerator Symptoms

The most common reasons your Admiral refrigerator is leaking water are a clogged defrost drain, cracked dispenser water tubing or a damaged evaporator.

The most common reasons your Admiral refrigerator is not cooling are a locked compressor, defective electronic control board or a damaged evaporator.

The most common reasons your Amana refrigerator compressor is not running are a locked compressor, defective electronic control board or a damaged evaporator.

The most common reasons your Amana refrigerator display is not working are a defective electronic control board, bad LED light assembly or an inoperative user interface.

The most common reasons your Amana refrigerator fan is not working are a defective electronic control board, damaged evaporator or a locked compressor.

The most common reasons your Amana refrigerator ice dispenser is not working are a bad icemaker assembly, faulty water valve or a defective electronic control board.